In 2007, the total amount of China mould export&import is USD 3.466 billion. compared with 2006, it has increased by 12.24%, of which the import amount is USD 2.053 billion, increased by 0.29%, and export amount is USD 1.413 billion, increased by 35.73%. Export has been keeping on increasing, and deficit has dropped down. Some informations shown as below:
1. According to the mould type, plastic&rubber mould has taken up the most percentage by 51.89% and 69.21% of the total import and export amount. Followed by punch dies, which took up 40.69% and 23.06% respectively. Figures are shown in Table I
China mould import&export data in 2007
Mould Type |
Import Amount(USD billions) |
Import
Ratio |
Export
Amount (USD billions) |
Export Ratio |
|
Plastic&Rubber Mould |
10.65 |
51.89 |
9.78 |
69.21 |
|
Punch Dies |
8.35 |
40.69 |
3.26 |
23.06 |
|
Other Moulds&
Standard Parts |
1.52 |
7.42 |
1.09 |
7.73 |
2. According to the imported places of origin, China mainly imported from Japan, South Corea and Taiwan, followed by German, America, Singarpore, Italy, Hongkong, Canada and France. Figures showed in Table II.
Main Import Places of Origin in 2007
Places of Origin |
Japan |
South Corea |
Taiwan |
German |
America |
Singarpore |
Italy |
Hongkong |
Canada |
France |
|
Import Amount (USD billions) |
7.43 |
4.26 |
2.39 |
1.35 |
0.51 |
0.45 |
0.37 |
0.32 |
0.29 |
0.23 |
|
Import Ratio(%) |
36.21 |
20.75 |
11.65 |
6.56 |
2.47 |
2.17 |
1.80 |
1.58 |
1.39 |
1.14 |
3. According to export destination, China’s main market are Hongkong, America, Japan, followed by Taiwan, German, France, Thailand, India, Malaysia and Spain. Figures shown as Table III.
Main Export Destinations in 2007
|
Export Destinations |
Hongkong |
America |
Japan |
Taiwan |
German |
France |
Thailand |
India |
Malaysia |
Spain |
|
Export Amount(USD billions) |
3.34 |
1.50 |
1.49 |
0.58 |
0.53 |
0.41 |
0.38 |
0.36 |
0.25 |
0.17 |
|
Export Ratio(%) |
23.65 |
10.64 |
10.60 |
4.12 |
3.75 |
3.01 |
2.72 |
2.55 |
1.77 |
1.18 |
|
